Supervising the Network

iv
Preface
Preface
Supervising the Network has two purposes:
• To help you set up your NetWare® network after completing the NetWare®
4.1/9000
NetWare Services installation procedure
• To help you manage your NetWare network after you have installed NetWare®
4.1/9000
NetWare Services.
This manual is to be used by network supervisors or system administrators
responsible for maintaining all or part of a UnixWare 2.1 NetWare Services
network.
Overview
Supervising the Network is organized to help you take advantage of your
networking experience. It provides quick access to utility instructions while
allowing a more detailed study of the theory and concepts behind NetWare®
4.1/9000 NetWare Services.
Once you are ready to work with the NetWare utilities, you can find
step-by-step instructions for those utilities.
• The graphical NetWare Administrator utility is available for users of Microsoft*
(MS) Windows (referred to as Windows in this manual).
• The NETADMIN, FILER, and PARTMGR text utilities are the DOS equivalent
to the NetWare Administrator utility.
• The HP-UX command line is used for administering nwcm and other NetWare
utilities.
Before You Begin
All of the tasks described in this manual are intended primarily for use by a
NetWare network supervisor on an HP-UX 9000 system. Other users with
sufficient rights can also perform these tasks.
For a definition of user types and a listing of rights and what they allow, see
Chapter 3, “Managing the NetWare Services File System,” in this manual.
Also, make sure you have installed and set up NetWare® 4.1/9000 and gone
through the complete installation procedures for the NetWare® 4.1/9000