Supervising the Network

7-7

Maintaining the NetWare Server

Managing NetWare Volumes

Figure 7-2 Possible Volume Configuration

If the HP-UX ﬁle system is conﬁgured so that ﬁle system mount points

coincide with paths to NetWare Services volumes, NetWare volume

statistics will be accurate.

In Figure 7-2, volume SYS: corresponds to the mount point for Disk 0,

Partition 2. Volume WORK: corresponds to the mount point for Disk 1

(which has one partition).

Disk 3 is a remote disk and is mounted at the root. It is not a NetWare

volume, but it can become one if a path is speciﬁed in the NetWare Services

voltab ﬁle. It also can become part of a NetWare volume if it is mounted in a

volume subdirectory, for example under /nwuvols/work/bob.

If Disk 3 is mounted at bob, NetWare users can expect the following

behavior:

• The volume statistics for volume WORK: will not include any information about