Supervising the Network

1-11
Getting Started
Setting Up Administration Utilities
7 Save these diskettes until you are ready to install client software.
Installing a Windows Workstation and Starting NetWare
Administrator
If you want to use the NetWare Administrator graphical utility to set up your
network, follow these instructions to first install Windows software on the
workstation. Then continue with this section.
Prerequisites
• A workstation cabled to the network and running Windows 3.1
• At least one NetWare Services server installed
• The WSDOS_1, WSWIN_1, WSDRV_1 and WSDRV_2 diskettes
• 1.2 MB of free disk space on the workstation
Procedure
1 Insert the WSDOS_1 diskette into your workstation’s disk drive.
2 Load the client installation program by typing
drive:install <Enter>
5 NetWare Client for DOS and
MS Windows ODI LAN
drivers
OS2DOC_X
1=English
2=French
3=German
4=Italian
5=Spanish
6 WSDRV_1
7 VLMBOOT
(optional)
Table 1-2 Client diskette labels
Diskette
number
Label for DOS/Windows Label for OS/2