Supervising the Network

1-10

Getting Started

Setting Up Administration Utilities

4 If you are installing a language version other than English (the default language),

set the “nwlanguage” environment variable by typing the following at the

workstation command line:

SET NWLANGUAGE=language <Enter>

Replace language with the appropriate language found in the NLS subdirectory

under either CLIENT\OS2 or CLIENT\DOSWIN.

5 Type

MAKEDISK drive_letter: <Enter>

Replace drive_letter with the letter that represents the driver into which you will

insert the blank formatted diskettes. For example, type either

MAKEDISK A: <Enter>

MAKEDISK B: <Enter>

The MAKEDISK utility copies the client installation ﬁles from the CD-ROM

directory to the diskettes. It prompts you to insert new empty formatted

diskettes.

6 Attach a label to each diskette and label the diskettes as described in Table 1-2.

Windows DOSWIN

Table 1-2 Client diskette labels

Diskette

number

Label for DOS/Windows Label for OS/2

1 NetWare Client for DOS and

MS Windows Disk 1

WSOS2_1

2 NetWare Client for DOS and

MS Windows Disk 2

WSOS2_2

3 NetWare Client for DOS and

MS Windows Disk 3

WSOS2_3

4 NetWare Client for DOS and

MS Windows Disk 4

OSUTIL1

If creating diskettes for Go to this subdirectory