Supervising the Network

1-9
Getting Started
Setting Up Administration Utilities
Setting Up Administration Utilities
The first time the network supervisor logs in, it must be as the User object
ADMIN. This is the only object, after installation, that has rights to create
and manage objects.
Before you can log in, however, you must first use the instructions in this
section to install a single client workstation from which you can run either
NetWare Administrator or NETADMIN to start creating objects on your
network. You can install and customize other workstations later using the
appropriate client manual.
Creating Client Install Diskettes from a Network Device
You can create disks using a network device.
Procedure
1 For DOS or Windows, format five high-density diskettes using the DOS
FORMAT command.
2 Map a drive to a server directory containing the NetWare Services files and
change to the SYS:PUBLIC\CLIENT directory.
3 Change to one of the following subdirectories.
If you want to Go to
Create workstation
installation diskettes from
CD-ROM
“Creating Client Install Diskettes from
CD-ROM”
Install a Windows
workstation
“Installing a Windows Workstation and
Starting NetWare Administrator”
Install a DOS workstation “Installing a DOS Workstation and
Starting NETADMIN”
If creating diskettes for Go to this subdirectory
DOS DOSWIN