Supervising the Network

4-35
Managing the NetWare Directory Services Tree
Creating and Managing Directory Services Partitions
Listing Partitions Using PARTMGR
Prerequisites
• A workstation running DOS 3.30 or later and PARTMGR
• A minimum of 512 KB of memory available on the workstation
• The Write property right to the ACL property of the NetWare Server object for
the partitions you want to view
Procedure
1 At the DOS prompt, type
PARTMGR <Enter>
2 From the “Partition Administration” menu, select “Manage Partitions.”
Your current context appears in the upper left corner of the screen.
3 Select the server whose partitions you want to list.
• If the server appears on the list, select it and press <F10>.
• If the server is not on the list, browse the directory by selecting partitions and
pressing <Enter> until you see the server you want. Select it and press <F10>.
A list of the partitions stored on the server appears.
Additional Information
Viewing a List of Replicas in a Partition
You can see a list of a partition’s replicas, the servers where the replicas are
stored, and whether a replica is a master, read/write, or read-only type.
You can view a replica list using NetWare Administrator or PARTMGR.
Both procedures are described in this section.
For more information about Refer to
Partitions “NetWare Directory partition,” “Partition
Management,” and “Replica” in Concepts
Using PARTMGR
“PARTMGR” in Utilities Reference