PCI Token Ring Release Notes for HP-UX 11.0 HP 9000 Networking Manufacturing Part Number: J1644-90025 E0601 U.S.A. © Copyright 2001 © Hewlett-Packard Company.
Regulatory/Safety Statements FCC EMI Statement (USA Only) The Federal Communications Commission (in 47 CFR 15.19, 15.21 and 15.105) has specified that the following notices be brought to the attention of the users of this product. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Europe EMI Statement This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. EMI (Australia and New Zealand) This product meets the applicable requirements of the Australia and New Zealand EMC Framework.
Declaration of Conformity 4
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty.
PCI Token Ring Release Notes for HP-UX 11.0 What’s in this Version? PCI Token Ring Release Notes for HP-UX 11.0 This document applies to the latest release of the PCI Token Ring for HP-UX 11.0. What’s in this Version? Benefits and Features PCI Token Ring software (product numbers J1644AA, A4930A and A5783A) supports the following: • 16/4 Mb/s hardware (product number A4930A) on V-Class servers. • 100/16/4 Mb/s hardware (product number A5783A) on all HP 9000 workstations and servers with the PCI bus.
PCI Token Ring Release Notes for HP-UX 11.0 Known Problems and Workarounds Known Problems and Workarounds • PHNE_21217 (core LAN products patch), or any patch that supersedes it, must be installed before the software product(s) is/are installed. System panics can result if this patch is not installed prior to configuring PCI Token Ring. • SAM patch PHCO_17792, or any patch that supersedes it, must be installed to obtain SAM support for PCI Token Ring.
PCI Token Ring Release Notes for HP-UX 11.0 Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements Software Requirements The system must have standard HP-UX 11.00 core products, including Streams and LAN/9000 software, installed on it. Hardware Requirements A5783A is supported on all HP-9000 servers and workstations with the PCI bus. A4930A is supported on V-Class servers only. OS Platform and Version Compatibility HP-UX CORE B.11.00.
PCI Token Ring Release Notes for HP-UX 11.0 Compatibility Information and Installation Requirements Hardware Installation Instructions See the Installing and Administering Token Ring/9000 manual. Software Installation Instructions See the Installing and Administering Token Ring/9000 manual. After reboot, check the what (1) string on the kernel. Execute: what/stand/vmunix | grep Token You should see: A5783A/A4930A/J1644AA HP PCI Token Ring () where is B.11.00.
PCI Token Ring Release Notes for HP-UX 11.0 Fixes and Features in this Release Fixes and Features in this Release The following are fixes in this version: • lanscan(1M) now shows the MAC address of the PCI Token Ring card immediately after initialization, even if the cable is not connected. • linkloop(1M) to itself, through a switch, will now work even if the card is in full duplex mode.
