PCI FDDI Administrator's Guide

Installing and Configuring PCI FDDI
5 - Connect the Adapter to the Network
Chapter 258
5b - Handling the Cables
WARNING Never look directly into an optical-fiber port. Some fiber
equipment can emit laser light that can injure your eyes. Always
assume that the cable is connected to a light source.
1. Keep the dust cap(s) on the ends of the cables and on the transceivers
of the adapter until you are ready to attach the cables.
2. Do not polish the connectors with cloth made of synthetic fibers; this
charges the fiber and attracts dust.
3. Do not crease or bend the cables sharply. Always maintain the
minimum bend radius specified by the cable manufacturer. The
minimum bend radius is usually 10-20 times the cables outer
diameter.
4. Do not force the connectors when attaching the cable. Most
connectors are keyed connections and fit only one way.
5. Be careful when attaching/detaching cables. Many cable failures
occur where the cable and connector are joined.
6. Do not stretch, puncture or crush the cables with staples or heavy
equipment.