PCI FDDI Administrator's Guide

Installing and Conﬁguring PCI FDDI

3 - Install the Adapter

Chapter 252

Wait until the system responds with “OK to press reset” or “Halted,

you may now cycle power”, then power off the system.

5. Disconnect the AC power cord from the system unit and from the AC

power source.

6. Remove the adapter card from its antistatic bag.

7. Align the PCI FDDI connector on the PCI FDDI adapter with the

PCI connector in the slot. Press the adapter ﬁrmly into place. Screw

the PCI FDDI adapter into place.

8. Now the card is now ready to be attached to the network.