PCI FDDI Administrator's Guide

Installing and Configuring PCI FDDI
3 - Install the Adapter
Chapter 2 51
3 - Install the Adapter
This section describes the installation of the PCI FDDI adapter cards
into your system. These instructions apply to the HP-UX operating
system versions 10.20, 11.0 and 11i.
For more detailed information, refer to the appropriate owner’s guide for
each specific HP system model.
You can also find information on installing PCI controllers/adapters on
the HP Electronic Performance Support System for your system CD.
Static Electricity Precautions
PCI FDDI adapter contains electronic components that can easily be
damaged by a small amount of static electricity. To avoid damage, refer
to the following guidelines:
• Keep the adapters stored in their antistatic bags until ready for
installation.
• Work in a static-free area whenever possible.
• Handle the adapters by the edges, and do not touch the electronic
components or electrical traces.
• Use the disposable grounding wrist strap provided, (HP 9300-1408)
and follow the accompanying instructions.
• Use any exposed metal surface on the computer chassis as a suitable
electrical ground.
Begin Installation
1. With OLA/R on the 11i OS you need not completely shut down the
system to install PCI I/O cards. See the OLA/R section in Chapter 1
for more information.
2. For 10.20 and 11.00 OS, shutdown the system and install the PCI
FDDI adapter according to the instructions in the HP Service Guide
for your system.
3. Attach the grounding strap to your wrist or ankle.
4. Shut down the system.
/usr/sbin/shutdown -h