NIO CommKit Host Interface Installation and System Administration Manual

2-12
Installing the NIO CommKit Host Interface
Remove the Existing CommKit Version
To upgrade, follow the installation instructions that come with HP-UX 10.x or
11.x
.
10 Install this version of the CommKit software, according to the instructions in this
manual.
11 Move to the /etc/opt/dk directory:
# cd /etc/opt/dk
12 Insert the second backup tape (the tar tape) into the tape drive.
13 Restore your old site-specific files:
# tar -xvf deviceFileName '*'
If you used a command or utility other than tar to back up the files, use the
appropriate command to restore the files from the tape.