NIO CommKit Host Interface Installation and System Administration Manual

B-24
Troubleshooting Guide
Other CommKit Error Messages
Action Make sure that the CommKit interface board is seated
properly.
0:LOCAL t_connect() failed error=1 in the log file.
Explanation The NLS server for the remote host is not running.
Action Make sure the remote host is up and the listener server is
running.
Explanation All of the configured channels are being used.
Action Make sure enough channels are configured, up to a
maximum of 512 channels per CommKit interface board.
Explanation The server address entered in the data switch database
does not agree with the server name entered on the host.
Action Verify that the server address is entered correctly in the
data switch database.