NIO CommKit Host Interface Installation and System Administration Manual

B-21
Troubleshooting Guide
Other CommKit Error Messages
Other CommKit Error Messages
Bad parameter in ANS message
This message indicates that the window buffer size or Universal Receiver
Protocol (URP) initialization mode are bad in the ANS message.
Explanation The jumpers on the CommKit interface board are not set
correctly.
Action Correct the jumper settings on the CommKit board.
Explanation The CPM-HS module in the data switch is out of service.
Action Check the CPM-HS module. If it is not working, run
restore cpm on the data switch console to bring the CPM-
HS module back into service.
Could not bring up listener
Explanation The listener server address of the local host is not in the
data switch database.
Action Add the listener server address to the data switch
database.
Explanation Bad fiber optic cable connections.
Action Check the connections.
Explanation The CPM-HS module is out of service.
Action Check the CPM-HS module. If it is not in service, run
restore cpm on the data switch console to bring the CPM-
HS module back into service.
Explanation The STREAMS scheduler (process strsched or str_sched)
is not running on the system.
Action Run ps -ef | grep strsched or ps -ef | grep str_sched to
make sure the STREAMS scheduler is running in the
background. If it is not, manually run str_sched or
strsched.