NIO CommKit Host Interface Installation and System Administration Manual

B-20
Troubleshooting Guide
Outgoing Call Error Messages
dkdial ... SIM no contact
Explanation The SIM rejected the call.
dkdial ... Splice completed
Explanation The connection endpoints were successfully spliced
together.
dkdial ... Splice failed
Explanation The connection endpoints could not be successfully
spliced together.
dkdial ... Transmit window too big
Explanation The call could not be completed because the transmit
window size is too big.
dkdial ... Trunk busy
Explanation The call could not be completed because a trunk in the
call path is busy.
dkdial ... Trunk configuration mismatch
Explanation The call was rejected because a trunk in the call path is
not properly configured.
dkdial ... Trunk not answering
Explanation The call could not be completed because a trunk in the
call path is not in service.
dkdial ... Unsupported baud rate
Explanation The requested baud rate is not supported by the autodialer.
dkdial ... Urp error
Explanation The call could not be completed because of an internal
protocol error.