NIO CommKit Host Interface Installation and System Administration Manual

B-17
Troubleshooting Guide
Outgoing Call Error Messages
dkdial ... No initial dial tone detected
Explanation The autodialer on the called port may have a bad
telephone line. The port has been marked as bad and
removed from the autodialer hunt group.
dkdial ... No initial dial tone. Try again later
Explanation The autodialer on the called port may have a bad
telephone line. The port has been marked as bad and
removed from the autodialer hunt group.
dkdial ... No response from autodialer. Try again
Explanation The autodialer on the called port failed to respond to the
data switch node. The port has been marked as bad and
removed from the autodialer hunt group.
dkdial ... No secondary dial tone. Try again later
Explanation The autodialer was signaled to wait for a secondary dial
tone in the dialing sequence and no such dial tone was
detected.
dkdial ... No secondary dial tone detected
Explanation The autodialer was signaled to wait for a secondary dial
tone in the dialing sequence and no such dial tone was
detected.
dkdial ... Open channel error
Explanation The call could not be completed because an error
occurred opening the channel.