NetWare Client for DOS and MS Windows User Guide

11-12
Configuring Client Workstations for Desktop SNMP Services
Modifying DOS System and NetWare Client Configuration Files
vlm = wsdrvprn.vlm
vlm = mib2prot.vlm
desktop snmp
enable monitor community = any
monitor community = “public”
enable control community = specific
control community = “public”
enable trap community = specific
trap community = “public”
sysname = “Suzanne Morley x893”
syslocation = “Building 2”
syscontact = “[e-mail]”
snmpenableauthentraps = on
transport provider ipx
trap target = ab123456:0123456789ab
trap target = cd654321:ba9876543210
transport provider udp
trap target = 999.88.77.66
trap target = 888.11.22.33
Configuring the HRMIB.INI File
The Host Resources MIB does not return information about devices attached
to the host workstation, such as printers, modems, and tape drives.
If the network management console is to view details of such devices, you
must list them in the HRMIB.INI file. Use a ASCII text editor to enter a
short description of each device.
The HRMIB.INI file is located in the NetWare Client directory (the default
is C:\NWCLIENT).
Sample Configuration File (HRMIB.INI) for the HRMIB.EXE
File
The following is a sample of the HRMIB.INI configuration file for
HRMIB.EXE: