NetWare 4.1/9000 Utilities Reference

iv
How to Use this Manual
How to Use this Manual
Purpose
This manual provides reference information about NetWare Services
utilities. You should be familiar with the platform you are using and with
NetWare terms and concepts (see Concepts).
For step-by-step instructions on completing tasks, use online help or refer to
Supervising the Network and any other manuals that apply to your specific
tasks.
Command Syntax
The command syntax shows what you must type to use the command. The
following example demonstrates command syntax:
nwcommand [“message” [[TO] [username | group name | server
name]]
The following table lists and explains the command syntax conventions.
Convention Explanation
nwcommand
Type in the word. You can enter workstation
commands in either uppercase or lowercase letters.
For server commands, however, you must type in the
command exactly as shown.
[ ]
Square brackets indicate that the enclosed item is
optional. You can enter the command with or without
the item.
Options for each command are listed with the
command. Options can often be abbreviated.
|
A vertical bar means “either, or.” You can use either
the item to the left of the bar, or the item to the right,
but not both.