NetWare 4.1/9000 Utilities Reference

3-93
Server Utilities
track
track
Purpose
Use at the HP-UX prompt to
• Display the incoming and outgoing SAP packets.
• Stop the displaying of incoming and outgoing SAP packets.
Syntax
track on | off | tables
Using track
You must be the root user to use the track command.
Parameter Use to
on Signal sapd to display NetWare servers advertising packets
received or sent.
Information is displayed on the console, and is formatted
according to whether the NetWare server is receiving the
information (IN), broadcasting the information (OUT), or
receiving a SAP request.
The information is sent to the device or file specified in the
nwcm sap_track_file configuration parameter.
Default: /dev/console.
off
Stop the router from displaying incoming and outgoing SAP
packets.
tables
Signal the SAP daemon to dump the contents of its server
table. The information is sent to the file specified in the
nwcm sap_dump_file configuration parameter. Default:
sap.dump.
This file is found in the directory specified by the nwcm
log_directory parameter. Default: /var/opt/netware4/log.