NetWare 4.1/9000 Utilities Reference

3-52
Server Utilities
nwengine
nwengine
Purpose
Use at the HP-UX prompt to set the total number of currently running
NetWare engines.
Syntax
nwengine num
Replace num with the number of NetWare engines to be running. The
number of engines must be at least one.
Using nwengine
• If more engines are running than the number specified, the number of engines is
decreased.
• If fewer engines are running than the number specified, new engines are started.
• The number of engines specified must be less than or equal to the value specified
by the nwcm parameter max_ncp_engines. You cannot start more engines than
what is specified by this parameter.
Examples
Additional Information
To Type
Run seven NetWare engines nwengine 7
Decrease the number of running NetWare engines from
seven to four
nwengine 4
Topic See
System tunable parameters for
nwcm
“System Tunable Parameters”