NetWare 4.1/9000 Utilities Reference

3-44

Server Utilities

nwcm

Using nwcm

If you use spaces before or after the equal sign, surround the parameter with

quotation marks. For example:

nwcm -s burst_mode_protocol=on

nwcm -s “burst_mode_protocol = on”

To view all the parameters available with this command, use the -v

parameter. For example:

nwcm -V*

ts_remove_time_

source=value

Specify a NetWare server to be removed

from the conﬁgured time source list speciﬁed

by the ts_time_source parameter.

Maximum length: 48

Default: Not Conﬁgured

ts_short_interval=

number

Specify how often time synchronization

polling occurs (in seconds) when a server

discovers it is not synchronized with network

time.

After the server is synchronized, the polling

interval increases until the server is using the

value speciﬁed by the ts_polling_interval

parameter.

Supported values: 0 to 600

Default: 10

Table 3-8 Time Synchronization Parameters

Parameter Use to