NetWare 4.1/9000 Utilities Reference

3-37
Server Utilities
nwcm
Table 3-3 IPX/SPX Parameters
Parameter Use to
diagnostics=value Specify if the diagnostics daemon
(diagnostics_daemon) is started by the NPS
daemon.
Set this parameter to Yes if Network
Management is enabled.
Supported values: Yes, No
Default: No
diagnostics_log_file=value Default: “diag.log”
Specify the name of the log file for
diagnostic messages. The location of the log
file is log_directory.
To prevent the diagnostics daemon from
logging messages to the file, set this
parameter to /dev/null.
Maximum length: 127
ipx_max_hops=number Specify the maximum number of routers that
can be traversed while searching for a
destination network. When the limit is
reached, the packet is discarded.
Supported values: 2 to 16
Default: 16
lan_x_trsr=value Controls whether or not this machine uses
Token Ring source routing. When set to
“Yes,” other machines can be accessed
across a Token Ring bridge. x can be a value
between 1 and 16.
Supported values: Yes, No
Default: Yes