NetWare 4.1/9000 Utilities Reference

3-28
Server Utilities
nwcm
file_access_control=
value
Specify the file access mode for NetWare
users. This parameter is used only if the
access control mode is not specified for the
volume in the voltab file.
Supported values: netware–NetWare rights
determine access, unix–HP-UX permissions
determine access, both–Both NetWare rights
and HP-UX permissions determine access,
none–No access control policy is enabled
and files are accessible to all NetWare
clients.
Default: netware
file_default_umask=
value
Specify the umask that is used to assign HP-
UX permissions on files created by NetWare
users.
Supported values: octal 0000 to octal 0777
Default: 0002
hybrid_allow_default_user
=value
Determine whether all NetWare users must
also be hybrid users. If set to No, NetWare
users who do not have a mapping in the /etc/
netware4/nwusers file use the nwuser
account. If set to Yes, all NetWare users must
have a mapping or else they cannot log in.
This parameter is used only when the
hybrid_users_enabled parameter is set to
Yes.
Supported values: Yes, No
Default: No
Table 3-1 General Server Parameters
Parameter Use to