NetWare 4.1/9000 Utilities Reference

3-24
Server Utilities
nwcm
nwcm
Purpose
CAUTION: This command should only be used to configure parameters that are not configurable
using the System Administration Manager (SAM).
Use at the HP-UX prompt to
• View and configure NetWare Services system parameters.
• Update NetWare Services parameters in the startup files.
• View and change IPX/SPX configuration information.
• View adapter and device information.
• View default settings for NetWare Services volumes.
• View NetWare Services network information.
Syntax
nwcm [option...]
Option Use to
-s param=value Set the parameter to the indicated value. Replace param
with a parameter from the “nwcm Parameters Tables.”
-v param View the value of the parameter. Replace param with a
parameter from the “nwcm Parameters Tables.”
-V folder View the values of parameters in a folder. To view
values for all parameters, specify folder number 0.
-r param Reset the value of the parameter to its default as
specified in the configuration schema. Replace param
with a parameter from the “nwcm Parameters Tables.”