NetWare 4.1/9000 Utilities Reference

3-23
Server Utilities
npsd
Additional Information
nwdiagd This daemon provides support for the IPX
diagnostic protocol and is required if nwumps is
enabled.
Enable nwdiagd using nwcm diagnostics.
sapd (Service
Advertising Protocol
Daemon)
This daemon is initialized if the nwcm parameter
router_type is set to “full.”
The sapd daemon performs those functions of the
SAP agent that are independent of NetWare
Services, such as building and maintaining the
Server Information Table.
This daemon is only needed if services on the
local machine are advertised, such as NVT,
Install Server, Application Sharing, and NetWare
services; or if an internal LAN is configured.
The nwcm router_type parameter controls
whether or not sapd is started.
nvtd (NetWare
Virtual Terminal
Daemon)
This daemon is used by Novell Virtual Terminal
clients to establish their connection.
Enable nvtd using nwcm spx_network_rlogin.
Topic See
Updating NetWare services
configuration
“nwcm” on page 3-25
Daemon or Driver Explanation