NetWare 4.1/9000 Utilities Reference

2-103
Workstation Utilities
WSUPGRD
Examples
/N Cause the utility to not delete the IPX driver. By default the old
driver is deleted before the ODI driver is installed.
Note: If this switch is specified and the ODI driver has the same
name as the IPX driver, the former will overwrite the latter—
thereby deleting it even if /N is specified.
/E0
| 1 | 2
Control changes that the utility makes to the AUTOEXEC.BAT
file.
E0 Specify that no changes be made to the AUTOEXEC.BAT file.
E1 Specify that the line which loads the IPX driver is to be deleted,
if present, from the AUTOEXEC.BAT file and replaced by lines
to load the LSL, ODI driver, and the IPX.
E2 Specify that the line which loads the IPX driver is to be deleted,
if present, from the AUTOEXEC.BAT file and replaced by a call
to a new batch file called NWSTART.BAT, which is to be
created to load the LSL, the ODI driver, and IPX. Default: E2.
/S Suppress the generation of a NET.CFG file from the information
in the IPX driver’s configuration table.
Note: A NET.CFG file may be generated even if this switch is
present if an LDC file is present with the ODI driver.
/I Cause the utility to print out the hardware ID in the master
configuration table of the ODI driver. You cannot use this option
with any other. If this switch is specified, no upgrade is
performed.
path Specify the path to and the name of the existing IPX driver.
Default: \IPX.COM.
To Type
Save the IPX driver and update the
AUTOEXEC.BAT file
WSUPGRD NE2000 /N /E1
Option Use to