NetWare 4.1/9000 Print Services

2-69
Managing Print Services with the NetWare Administrator Utility
Working with Print Device Modes
5 Repeat Step 4 until all of the functions that you want as part of this mode are listed
in the correct order in the “Mode Functions” list box.
If you make a mistake, use “Delete” or “Add Above” to rearrange the functions
listed in “Mode Functions.”
6 Choose “OK.”
You return to the “Modify Existing Device” dialog.
Viewing or Modifying Print Device Modes
This feature allows you to modify a print device mode that you previously
entered.
You can change the name of the mode or change the functions executed from
this mode.
A mode is a combination of functions that you define to allow the print
device to meet specific printing needs. For example, you might define a print
device mode called “Title” that includes functions for bold, double wide,
and letter-quality printing.
Use the following procedure to modify an existing print device mode.
Procedure
1 From the “Modify Existing Device” dialog, select the mode you want to modify
and choose “Modify.”
2 (Optional) Enter a new name for the mode in the “Mode Name” field.
3 Select the function that you want to add to the mode from the “Device Functions”
list.
4 Select the function in the “Mode Functions” list next to where you want to insert
the new function.
5 Choose “Add Below” or “Add Above” to insert the selected device function in
the correct place in the “Mode Functions” list.
6 (Optional) Select any mode function that you want to delete from the definition
of this mode; then choose “Delete.”
The selected function is no longer part of this mode. The function is still a part
of this print device definition, but is not used for this mode.
7 Repeat Steps 2 through 5 as needed.