NetWare 4.1/9000 Print Services

2-38
Managing Print Services with the NetWare Administrator Utility
Printer Options
copies requested for this print job.
• “Abort Job” allows you to cancel this print job and immediately stop printing.
• “Pause” changes the status of this printer to Paused. If no jobs are printing and
Paused is used, the status is changed to Stopped. Only a print queue operator
can perform this action.
• “Start” changes the status of this printer from Paused to Printing, Stopped to
Printing, or Stopped to Waiting for Job.
• “Mount Form” allows you to specify a new printer form that you have
mounted on this printer. When you use this option, the “Mounted Form” field
will change to reflect the newly mounted form. Only print jobs that specified
the new form can be printed.
• “Eject Page” sends a command to this printer to eject the page that is being
printed. This is like a Form Feed command.
• “Close” closes this dialog and returns to the “Identification” page of the
Printer object dialog.
4 Choose “Close” to return to the “Identification” page of the Printer object dialog.
Changing Printer Type
Procedure
1 From the browser, select the “Details” dialog for the printer you want to
configure by double-clicking on the printer object.
The printer “Identification” page appears.
2 Choose “Configuration.”
The printer “Configuration” page appears.
3 Using the down arrow to the right of the “Printer Type” field, choose the correct
printer type from the list.
For printers that attach directly to the network, select type “Other/Unknown.”
(For example, HP* IIIsi or 4si, COMPAQ* PageMarq 20, GENICOM 7170, or
Talaris 1794 Printstation.)
A dialog appears where you must check the communication values for the
selected printer type. (Other/Unknown and XNP do not have a dialog; they are
configured elsewhere.)
4 Make any necessary changes in the communication parameters dialog for this