NetWare 4.1/9000 Print Services

9-5

Using NETUSER and PSC

Using PSC

Command Parameters

Replace printserver with the context, if necessary. The printer must be a

printer number. Replace option with one option from the following table.

Table 9-3 PSC Options

Option Syntax Description

Abort AB Stops the current print job and deletes it from the print

queue. The print server and printer must be speciﬁed.

Cancel down CD Cancels the “Going down after current jobs” option

available in PCONSOLE, NetWare Administrator, and

the print server console. The print server and printer

must be speciﬁed.

Form feed FF Advances the printer to the top of the next page. The

printer must be paused, stopped, or waiting for a print

job. The print server and printer must be speciﬁed.

Help /? or /H Displays online help.

List L Displays a tree layout of the current printing setup.

Mark M [character] Prints a line of whatever character you indicate so that

you can see which line the printer will start printing on.

Default: *

Mount form MO F=number Tells the print server that you have mounted a new

form on the printer. Specify the form number (form

names are referenced only in NetWare Administrator

and PRINTDEF).

Pause PAU Stops the printer temporarily. The STARt option

continues printing the print job from the point that the

print job was paused. The print server and printer must

be speciﬁed.

Private PRI Removes the printer from the list of network printers.

Use if you don’t want other network users to print on

the speciﬁed printer. The print server and printer must

be speciﬁed.