NetWare 4.1/9000 Print Services

6-15
Setting Up Printers Attached to Workstations or Servers
Using Nprinter Daemon
The supported levels are 0 to 39, where 0 is the highest priority.
e (Optional) Under the “form_name” column, enter any predefined form.
Forms are predefined in the UNIX print system. If forms are not being used,
this column should be left blank.
2 Edit the RPControl file.
The RPControl file has the following format. Syntax examples are provided
within the file itself.
a On a new line under the “rp” column, type “rp”.
b Under the “print_server_name” column, type (in all caps) the name of the
NetWare print server that will be servicing this printer.
c Under the “printer_slot” column, type in the printer number that was assigned
to the printer when it was created.
d Under the “printer_name” column, type in the name of the printer that was
entered in the PRTConfig file.
3 (Optional) Edit the RPConfig file.
Deleting a Printer Entry
Procedure
#rp print_server_name printer_slot printer_name
rp LOGAN 0 hp
rp ARES 8 lp_apple
RPConfig Syntax with Default Setting Supported Settings
Max_Wait_Packet_Time = 2000 100 to 3200 milliseconds
Status_Check_Interval = 5 1 to 3600 seconds
Idle_Before_Job_End = 2 1 to 60
Idle_Before_Prt_Status = 20 1 to 3200
Error_Before_Inform = 5 1 to 3200
Warn_Before_Inform = 5 1 to 3200