NetWare 4.1/9000 Print Services

4-8
Sending Jobs to Network Printers Using CAPTURE and NPRINT
Using CAPTURE
No autoendcap
(Continue capture)
NA Specifies that the captured data not be closed and sent to the
printer when you exit an application. This allows more
information to be added to the print job.
When this option is used, the capture will not close unless
you also specify TI= in the command. Otherwise, you must
issue an EC command to close the capture.
No banner NB Suppresses banner page.
No form feed NFF Suppresses form feed at the end of a print job.
No notify NNOTI Specifies that the user not get a message after the print job
prints. Do not confuse this option with the notification option
in PCONSOLE that informs designated users when the
printer is having problems.
Default: NoNOTIfy enabled
No tabs NT Specifies that tabs are not converted to spaces in a print job.
This is also called “byte stream.” This option ensures that all
the tab characters in your print job arrive at the printer
unchanged. Use this option for most network printing
situations, especially when printing graphics. Default is NT
(byte stream).
Notify NOTI Specifies that the user get a message after the print job prints.
This option does not notify you if the printer has a problem
or if your job cannot be printed.
Printer P=name Indicates to which printer the print job should be sent; you
may set a default in a print job configuration. Do not use this
option with the Q= option.
Queue Q=name Indicates to which print queue the print job should be sent;
you may set a default in a print job configuration. Do not use
this option with the P= option.
Server S=name Specifies the NetWare server if you want the print job sent to
a bindery print queue. Not used for Directory Services print
queues. Default = current tree or server.
Table 4-2 CAPTURE Options
Option Syntax Description