NetWare 4.1/9000 Print Services

4-6
Sending Jobs to Network Printers Using CAPTURE and NPRINT
Using CAPTURE
Details D Lists the printing parameters for a capture. It also indicates
whether a print job configuration was used.
End capture EC Ends the capture of data to an LPT port. When used in
conjunction with the L=number option, it ends the capture to
the port number specified. When used without the L=
number option, it defaults to the LPT1 port. When used with
the ALL option, it ends the capture for all LPT ports. If data
was being captured to a network file, the file is closed.
The CA option can be used with this option to end he capture
of data to LPT ports and discard the data that was being
captured.
Running CAPTURE again will end the current capture and
assign new values.
Form F=name or
number
Specifies the form that the printer will use. (You must define
forms using PRINTDEF or NetWare Administrator before
users can use form names or numbers.) With an invalid name
or number, CAPTURE gives a warning message.
Form feed FF Enables form feed after your print job has been printed.
“FormFeed enabled” means that the printer starts printing the
next job at the top of the next sheet of paper. However, if an
application automatically enables form feed at the end of a
file, adding this option causes an extra blank page to be fed
through.
Default: FormFeed enabled
Help /? or /H Displays general help information. Specific options are
displayed for certain utilities on the initial help screen.
Hold HOLD Allows you to send a print job to a queue without having it
print. To release the hold on the job, you can use either
PCONSOLE or NetWare Administrator.
Table 4-2 CAPTURE Options
Option Syntax Description