NetWare 4.1/9000 Print Services

4-5
Sending Jobs to Network Printers Using CAPTURE and NPRINT
Using CAPTURE
Command Parameters
Replace option with one or more of the following. The options help you
define how a job is printed. Separate options with a space or forward slash (/
) Options are not case-sensitive.
Table 4-2 CAPTURE Options
Option Syntax Description
All ALL When used with the End Capture (EC) option, it ends the
capture of all LPT ports. Used with the /? option, it displays
all online help screens.
Autoendcap
(End capture
automatically)
AU Specifies that the captured data be closed and sent to the
printer when you exit an application.
Default: Autoendcap enabled
Banner B=text Indicates what will appear in the lower half of the banner
page. Limit is 12 characters. Replace text with any word or
phrase up to 12 characters long. To allow spaces in a banner
name, enclose the name in quotation marks (for example,
“ON THE GO”)
Default: The captured port (for example, LPT1)
Cancel CA Used in conjunction with the EC option. Ends the capture of
data to LPT ports and discards the data that was being
captured.
Cancel and end
capture
ECCA Ends the capture of data to LPT ports and discards the data
that was being captured. If the CReate (CR=) option was
used in the original Capture statement, the file is closed but
not discarded.
Copies C=number
(1-65,000)
Specifies the number of copies. CAPTURE allows up to
65,000 copies in NetWare Services™ software. Default is 1
copy.
Create
(not available in
OS/2)
CR=path and
filename
Creates a file in which to store printed data. This option can
be used only with the TI=, AU, or NA options.