NetWare 4.1/9000 Print Services

3-15
Managing Print Services with PCONSOLE
Printer Options
Configuration The options shown below are
for parallel printers. For
information pertaining to
other printer types, use Help.
This option takes you to a screen listing
configuration options for the type of printer
you have selected. For example, the
configuration options for a parallel printer
are listed here. Options for other printer
types are available in online Help.
Port LPT1, LPT2, LPT3. This specifies the port to
which the parallel printer is cabled
(workstation or server). Default is LPT1.
Location “Manual Load” (remote) or “Auto Load
(Local).”. Only printers cabled directly to the
print server can autoload. The default is
“Manual Load (Local).”
Note: This field is not used by the nprinter
daemon.
Interrupt Lists available interrupt settings along with
“None (polled mode).” Most devices in the
computer are configured to use a particular
interrupt. You should have recorded the
interrupts your printing ports use. Polled
mode eliminates the potential for interrupt
conflicts and is the recommended option.
Address restriction If you have selected the “Manual Load”
option, allows you to set address restrictions
for a remote printer so that it can be loaded
only on a specified workstation or network.
Default is No.
Network address Lists the address of the network the printer
can be loaded on. Default is all.
Node address Lists the address of the workstation or server
(node) the printer can be loaded on. Default
is all.
Table 3-3 Printer Configuration Parameters in PCONSOLE
Parameter Options Description