NetWare 4.1/9000 Print Services

3-11
Managing Print Services with PCONSOLE
Print Queue Options
See Table 3-2, “Print Job Parameters in PCONSOLE,” for information on
each of these parameters.
4 To change an existing print job’s configuration from the “Print Jobs” screen,
select the job and alter its configuration parameters as desired.
See Table 3-2, “Print Job Parameters in PCONSOLE,” for information on each
of these parameters.
5 To delete a print job from the “Print Jobs” list, press <Del>.
Setting Print Job Parameters
You can change or set the following parameters for print jobs. Many of these
parameters are also command line options for NPRINT and CAPTURE.
Table 3-2 Print Job Parameters in PCONSOLE
Parameter Description
Print job The ID number of the job to be printed.
Client The name and station number of the object that submitted or is submitting
the job.
Description You can enter a description of the file you are printing for identification
purposes. The default is the filename.
Status The status of the print job.
User hold You can put your print job on hold. If you do, the file is not printed until
you remove the hold. The “User Hold” parameter can be changed by either
the owner of the print job (the person who submitted it) or a print queue
operator.
Type “Y” (for “Yes”) to place a hold on the job; type “N” (for “No”) to
remove the “User Hold” parameter.
Operator hold The “Operator Hold” parameter can be changed only by a print queue
operator. If the “Operator Hold” parameter is set to “Yes,” the job is not
printed until the operator resets the parameter to “No.”
Service sequence If you are a print queue operator, you can change the “Service sequence”
parameter. The service sequence is the position of the print job in the print
queue.