J2496B DTC16RX Manager Version A.14.3C.000 for HP-UX 10.20 Release Notes, June 1998

12
J2496B DTC16RX Manager Version A.14.3C.000 for HP-UX 10.20 Release Notes
Compatibility and Installation Requirements
Compatibility and Installation
Requirements
Migration is supported from the following versions of the DTC16RX
Manager from:
• A.14.39.000 running on HP-UX 9.04,
• A.14.3A.000, A.14.3A.B00 (PHNE_12644) running on HP-UX 10.x
(10.01, 10.10, 10.20).
CAUTION You cannot migrate directly from DTC16RX Manager version
A.14.39.000 to version A.14.3C.000. You must first migrate to HP-UX
10.01 and install DTC16RX Manager version A.14.3A.000. Then,
migrate to HP-UX 10.20 and install DTC16RX Manager version
A.14.3C.000.
To update your system, you must install DTC16RX Manager version
A.14.3C.000 using the swinstall utility. The swinstall program allows you
to select which components of the software you want to install (Runtime,
Minimum Runtime, Manual Pages).
It is recommended to install all the components of the product.
Please refer to Using the HP DTC16RX Manager (J2496-90000) and/or
the man pages for swinstall.
Supported terminals:
The standard terminal 700/65 replaces the 700/96 Block-mode terminal
as the supported/recommended console for the HP 9000. To use this
terminal with the DTC16RX Manager, use VT100 or VT220 terminal
emulation. Function keys are accessed by pressing the <Control> and
<F> keys simultaneously, followed by the number of the function key
(range: 1 to 8). For example, to access <F5>, press <Control + F> + <5>.