J2496B DTC 16RX Manager Version A.14.3J.110 for HP-UX

6 Chapter1
J2496B DTC 16RX Manager Version A.14.3J.110 for HP-UX Release Note
Known Problems and Workarounds
Known Problems and Workarounds
None.
Compatibility and Installation Requirements
Migration is supported from the following version of the DTC 16RX Manager from:
• A.14.3C.000 running on HP-UX 10.20,
• A.14.3H.000 and A.14.3J.000 running on HP-UX 11.00.
CAUTION To migrate from another version of DTC 16RX Manager, you must first migrate
to HP-UX 11.00 and install DTC 16RX Manager version A.14.3J.000. Then you
migrate to HP-UX 11.11, and install DTC 16RX Manager version A.14.3J.110.
To update your system, you must install DTC 16RX Manager version A.14.3J.110 using the
swinstall utility. The swinstall program allows you to select which components of the
software you want to install (Runtime, Minimum Runtime, Manual Pages).
It is recommended to install all the components of the product.
Please refer to Using the HP DTC 16RX Manager (J2496-90000) and/or the man pages for
swinstall.
Supported terminals:
The standard terminal 700/65 replaces the 700/96 Block-mode terminal as the
supported/recommended console for the HP 9000. To use this terminal with the DTC 16RX
Manager, use VT100 or VT220 terminal emulation. Function keys are accessed by pressing
the <Control> and <F> keys simultaneously, followed by the number of the function key (range:
1 to 8). For example, to access <F5>, press <Control + F> + <5>.