J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX 11.11 Release Notes HP 9000 Systems Manufacturing Part Number: J2120-90036 E1000 U.S.A. © Copyright 2000 © Hewlett-Packard Company, 2000. All rights reserved.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty.
©copyright 1980, 1984, 1986 Novell, Inc. ©copyright 1986-1992 Sun Microsystems, Inc. ©copyright 1985-86, 1988 Massachusetts Institute of Technology. ©copyright 1989-93 The Open Software Foundation, Inc. ©copyright 1986 Digital Equipment Corporation. ©copyright 1990 Motorola, Inc. ©copyright 1990, 1991, 1992 Cornell University ©copyright 1989-1991 The University of Maryland ©copyright 1988 Carnegie Mellon University Trademark Notices.
1 J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX 11.11 Release Note Announcement This document describes version A.14.4J.110 of the J2120B DTC Manager/UX software running on HP-UX 11.11. What’s in this Version Version A.14.4J.110 of the DTC Manager/UX software supports HP 9000 Series 700 and HP 9000 Series 800 systems running HP-UX release 11.11. Benefits Version A.14.4J.110 of the DTC Manager/UX software contains new features.
J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX 11.11 Release Note Known Problems and Workarounds Known Problems and Workarounds This section describes known problems and workarounds for Version A.14.4J.110 of the DTC Manager/UX software. • A3658A (EISA) 100 Base-T LAN card is not supported with DTC Manager/UX. • If several cards are available on your system, the rbootd and dtcnmd daemons have to be launched only for the LAN card used by DTC Manager/UX to manage the DTCs.
J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX 11.11 Release Note Compatibility and Installation Requirements CAUTION To update from another version of DTC Manager/UX, you must first upgrade to HP-UX 11.00 and install DTC Manager/UX version A.14.4J.000. Then upgrade to HP-UX 11.11, and install DTC Manager/UX version A.14.4J.110. DTC Configuration Migration To migrate from one system to another, transfer the DTC configurations to the new HP-UX 11.11 system where DTC Manager/UX version A.14.4J.
J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX 11.11 Release Note Patches and Fixes in this Version Supported Terminals The standard terminal 700/65 replaces the 700/96 Block-mode terminal as the supported/recommended console for the HP 9000. To use this terminal with the DTC Manager/UX, use VT100 or VT220 terminal emulation. Function keys are accessed by pressing the and keys simultaneously, followed by the number of the function key (range: 1 to 8).
