Installing and Configuring DHCPv6 2

Configuring DHCPv6 2.001
Configuring the Client
Chapter 344
-a Using the results of the specified filter, directly apply
the variable definitions to the existing configuration
files (for example, /etc/rc.config.d/netconf-ipv6).
-c Create a set of staging files using the results of the
selected filters.
-d Process the DNS variable set: [domain, nameserver].
-i Process the INTERFACE variable set:
[IPV6_SECONDARY_INTERFACE_NAME,
IPV6_ADDRESS, IPV6_PREFIXLEN,
DHCPV6_ENABLE].
-p Print results to the screen (stdout), this is the
default action if neither -c nor -a are specified.
-n Process the SIP server address and SIP domain
name information.
-s Process the NIS variable set [NIS_DOMAIN,
YPSET_ADDR].
-v Process the vendor-specific information.
lan_interfaces Specifies LAN interfaces such as lan0, lan1, whose
data must be translated to a readable format. If you
do not specify the LAN interface, dhcpv6db2conf
processes the entries of all interfaces which are UP.
When you invoke dhcpv6db2conf with the -a option, dhcpv6db2conf
updates the /etc/resolv.conf, /etc/rc.config.d/netdaemons,
/etc/rc.config.d/netconf-ipv6, and /etc/rc.config.d/namesvrs
files.
For more information, type man 1M dhcpv6db2conf at the HP-UX
prompt.