Installing and Configuring DHCPv6 2

Configuring DHCPv6 2.001
Configuring the Client
Chapter 3 41
-s Specifies the list of vendor-specific options that the
client daemon must request from the server daemon.
You must use this option in conjunction with the -m
option.
-R Notifies the client to utilize the unused IPv6 addresses
stored in the /etc/dhcpv6client.data file instead of
requesting new IP addresses from the server.
-r Specifies the interface to which IPv6 addresses will be
released.
-v Prints the version information of the client daemon.
-t Gets the temporary IPv6 addresses from the DHCPv6
2.001 client daemon.
-T Gets both temporary and permanent IPv6 addresses
from the client daemon.
-I Request only the configuration parameters. Do not get
IPv6 addresses.
If you do not specify the -t or -T option, dhcpv6client_ui obtains only
permanent IPv6 addresses.
The options for [-o] to specify various configuration parameters for an
interface are as follows:
1. dns_sa for DNS server address
2. dns_dl for DNS domain list
3. sip_sa for SIP server address
4. sip_dl for SIP domain list
5. nis_sa for a list of IPv6 addresses of one or more NIS servers
available to the client.
6. nis_dl for the NIS domain name of the client.
7. nisp_sa for the list of IPv6 addresses of one or more NIS+ servers
available to the client.
8. nisp_dl for the NIS+ domain name of the client.
9. all for all the above options