Installing and Configuring DHCPv6 2

Installation and Migration
Migrating from DHCPv4 to DHCPv6 2.001
Chapter 2 27
Migrating from DHCPv4 to DHCPv6 2.001
If you are using DHCPv4 and wish to migrate to DHCPv6 2.001, you
must install the DHCPv6 2.001 software from the following location:
http://www.software.hp.com
See “Installation Instructions” on page 22 for more information on
installing DHCPv6 2.001.
NOTE You must configure at least one DHCPv6 2.001 server or relay agent on
the network.
You can run DHCPv4 and DHCPv6 2.001 concurrently on the same
system to obtain IPv4 and IPv6 address, respectively.