Installing and Configuring DHCPv6 2

Installation and Migration
Installing DHCPv6 2.001
Chapter 222
Installation Instructions
To install DHCPv6 2.001, complete the following steps:
Step 1. Review “Prerequisites” on page 21 to ensure your system meets DHCPv6
2.001 installation requirements.
Step 2. To download the DHCPv6 2.001 software, complete the following steps:
a. Go to the HP Software Depot at http://www.software.hp.com.
b. Search for “DHCPv6” and read the “Overview” and “Installation”
pages for DHCPv6 2.001.
c. Select Receive for Free >> option at the bottom right of the
Overview page.
d. Choose the DHCPv6 2.001 release for the HP-UX 11i v1 or HP-UX
11i v2 operating system.
e. Enter your registration information, and read and accept the Terms
and Conditions statements.
f. Select Download at the bottom of the page and save the DHCPv6
2.001 depot to a local file on your system, for example:
/tmp/DHCPv6.depot.
NOTE Before installing DHCPv6 on an HP-UX 11i v1 operating system,
ensure that the Transport patch PHNE_28895 (or its superceded
patch) is installed on your system.
Step 3. Use the following swinstall command to install the DHCPv6 2.001
software depot on your system:
# swinstall -s <destination path>
where:
<destination path> specifies the absolute path of DHCPv6 depot on
your system.
After installing the DHCPv6 2.001 depot, dhcpv6d stores the lease
information in the /etc/dhcpv6db directory.