Installing and Configuring DHCPv6 2

Installation and Migration
Installing DHCPv6 2.001
Chapter 2 21
Installing DHCPv6 2.001
Read this chapter before installing the DHCPv6 2.001 software. You can
install DHCPv6 2.001 only on a dual stack system.
NOTE DHCPv6 available in the base HP-UX 11i v2 operating system is not
compatible with this Web upgrade of DHCPv6 2.001 on HP-UX 11i v2.
Prerequisites
The following sections discuss prerequisites for installing DHCPv6 2.001
on the HP-UX 11i v1 and HP-UX 11i v2 operating systems.
HP-UX 11i v1
The following are the prerequisites to install the DHCPv6 2.001 software
depot on the HP-UX 11i v1 operating system:
• 32- or 64-bit HP-UX 11i v1 (B.11.11) PA-RISC system
• IPv6 bundle (IPv6NCF11i) or Transport Optional Upgrade Release
(TOUR) 2.0/2.2
• Transport patch - PHNE_28895 (or its superceded patch)
NOTE You can download the IPv6 software from the HP software depot at
http://www.software.hp.com (Search for the HP-UX IPv6 Product).
You can download the PHNE_28895 Transport patch (or its superceded
patch) from http://www.itrc.hp.com.
HP-UX 11i v2
HP-UX 11i v2 customers can optionally install the PHNE_31736 patch to
obtain the fix for the following defect SR 8606326543.