Installing and Administering HP FDDI/9000 Software

50 Chapter 3
Configuring HP FDDI/9000
Verifying Remote System Configuration
6. Verify the link level encapsulation with the lanconfig command. The
example below will provide information about Net-Interface
NameUnit lan1.
lanconfig lan1
7. Verify that the appropriate device files have been created. In the
example below the first line lists the HP FDDI/9000 device files, the
second line lists the diagnostic device files.
ls -l /dev/lan*ls -l /dev/nettrace /dev/netlog
HP FDDI/9000 installation is verified if the steps above succeed.