HP-UX TN3270 Users Guide, March 1998

Appendix C 301
File Transfer Messages
Host File Transfer Messages
expired or until the host responds. If you are not running 3270 emulation
in the background, switch to the 3270 display session to see if the host
has written any messages to the screen.
TRANS011
The host connection was lost. File transfer was
canceled.
The connection with the host was lost during file transfer because of a
link failure, or the session may have been deactivated. Check the reasons
for the failure, reactivate the session, and retry.
TRANS012
No session was found configured for HLLAPI.
You issued a file transfer command from the command line without
specifying a session identifier, and no 3270 session had a session ID
assigned. Assign session IDs to one or more display sessions, restart the
TN3270 emulation program so that the new session IDs take effect, and
then reissue the command.
TRANS013
An error occurred sending the file to the host. File
transfer was canceled.
This message normally means that the file transfer was terminated
through the File Transfer dialog in the TN3270 emulation program. In
other cases, it indicates an unidentified error. Retry the command.
TRANS014
An error occurred receiving the file from the host.
File transfer was canceled.
This message normally means that the file transfer was terminated
through the File Transfer dialog in the TN3270 emulation program. In
other cases, it indicates an unidentified error. Retry the command.
TRANS015
The required amount of host storage (memory) is not
available. File transfer was canceled.
The host did not have enough storage available for the file transfer to be
completed. Contact host personnel to arrange for more storage.