HP-UX TN3270 Users Guide, March 1998

150 Chapter 5
Transferring Files
Transferring Files Using the Menu Interface
Send / Receive
Choose Send to transfer a named HP-UX file to the
host, or Receive to transfer a host file to your HP-UX
computer.
Local file name
The name of the HP-UX file sent to the host or the
HP-UX file receiving data from the host. This may be
any valid HP-UX file name. If the file is not in the
current directory, specify the full path (not a relative
path).
Host filename
The host file to which the data is sent, or the file
received from the host.
Host filetype
The VM/CMS file type of the host file.
Host filemode
The VM/CMS file mode of the host file. This parameter
is optional; if you do not specify it, the default A1 is
used.
File Transfer Parameters
If your host file transfer program requires any other
parameters or options that are not included in the
Options for SESSnn dialog box, enter them here in the
format expected by the host program. Your System
Administrator or host support personnel should
provide you with information about any additional
parameters required here. If you do not need to use any
additional parameters, leave this edit box blank.
The following push buttons are available on the Transfer VM/CMS File
on SESSnn dialog box:
<OK>
Choose <OK> to begin sending or receiving.
<Cancel>
Choose <Cancel> to abandon the file transfer process.
Transferring the VM/CMS File
To transfer the file, use the following procedure:
Step 1. Choose Send or Receive.