HP-UX TN3270 Users Guide, March 1998

Chapter 5 129
Transferring Files
Fast Path to File Transfer
b. Choose Send to send a file to the host or Receive to receive a file
from the host.
c. Enter file names and any other parameters specific to the host type
(see “Transferring Files Using the Menu Interface”).
d. Choose <OK> to start the transfer. You can transfer only one file at a
time per session.
e. Choose <OK> to acknowledge the start of file transfer.
If you need to stop the file transfer, choose Abort Transfer, select the
<Abort File Transfer> radio button to confirm terminating the file
transfer process, and then choose<OK> .
To return to the main screen when you finish transferring files, choose
<Done> from the File Transfer dialog box or press Esc. From a 3270
session, press ACTIONS (default keystroke Ctrl + U) to return to the main
screen.
Motif The ACTIONS keystroke is not required in the Motif program.
End of section
For complete instructions about conducting file transfer from the HP-UX
command prompt, read the rest of this chapter. For a complete list of
TRANSnnn file transfer messages, see Appendix C, “File Transfer
Messages.”