HP-UX TN3270 Users Guide, March 1998

128 Chapter 5
Transferring Files
Fast Path to File Transfer
b. Enable a session. To do so, highlight it in the Control Display
Sessions dialog box and choose <Change Status>. Repeat this step
until you have enabled all the sessions you need.
c. Make the first session you want to use current by highlighting it and
choosing <Make Current>.
d. Choose <Done> to return to the main screen.
e. Press Esc to move to the 3270 session.
f. Log on to the host.
g. Press ACTIONS (default keystroke Ctrl + U) to return to the control
interface.
Motif Each enabled session appears as a new window on the Motif screen.
When you return to the main screen, the session window containing the
current session is automatically displayed.
The ACTIONS keystroke is not required in the Motif program.
End of section
Step 4. Use the following steps to set parameters for file transfer:
a. To begin the File Transfer process, choose File Transfer from the
Control menu.
b. In the File Transfer dialog box, highlight the session you want to use.
(The session must be available, that is, you must be logged on to the
host.)
c. Choose <Host Parameters>.
d. In the Options dialog box, specify the type of host environment you
are communicating with (TSO, VM/CMS, or CICS), and set the
appropriate parameters. (For definitions of the parameters, see
“Setting Host File Transfer Parameters”.)
e. Choose <OK> to return to the File Transfer dialog box.
Step 5. Begin transferring files using the following steps:
a. Choose <Start transfer>. The Transfer File on SESSnn dialog box
for your host environment is displayed.