HP-PB Token Ring Release Notes HP 9000 Networking Manufacturing Part Number: J2166-90048 E1200 United States © Copyright 2000 Hewlett-Packard Company.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty.
from the Regents of the University of California. ©copyright 1980, 1984, 1986 Novell, Inc. ©copyright 1986-1992 Sun Microsystems, Inc. ©copyright 1985-86, 1988 Massachusetts Institute of Technology. ©copyright 1989-93 The Open Software Foundation, Inc. ©copyright 1986 Digital Equipment Corporation. ©copyright 1990 Motorola, Inc.
HP-PB Token Ring Release Notes for HP-UX 11i What’s in This Version The following information is for HP-PB Token Ring adapters for the V-Class servers and the B, C, and J-Class workstations.
HP-PB Token Ring Release Notes for HP-UX 11i Known Problems and Workarounds Known Problems and Workarounds The HP-PB Token Ring driver does not implement the functionality to change the SNMP MIB ifAdmin status.
HP-PB Token Ring Release Notes for HP-UX 11i Patches and Fixes for this Version The HP-PB Token Ring card is customer-installable and configurable on the B, C, and J-Class workstations. Patches and Fixes for this Version Patch PHNE_20536: • I/O slowdown due to HP-PB Token Ring driver absorbing a large number of IOVRs.
HP-PB Token Ring Release Notes for HP-UX 11i Patches and Fixes for this Version Patch PHNE_17355: • The card can go into a hang state and an error message will be logged in the ‘/var/adm/syslog/syslog.log’ file. A bug in the firmware can create a situation such that the firmware sends the inbound frames with the size larger than the configured MTU. However, the driver does not provide enough buffers for DMA.
HP-PB Token Ring Release Notes for HP-UX 11i Patches and Fixes for this Version increased. The maximum MTU size for the HP-PB Token Ring card has been increased to the standard 4500, and the default MTU is set to 4170. The user may increase this to 4500, using the lanadmin command. • SAM gives an error when configuring HP-PB Token Ring card. The cause of this defect was incorrect syntax usage for a shell command in the initialization script /usr/sbin/hptoken_init. The syntax has been corrected.
