Enhanced AutoFS Release Notes, March 2004

Enhanced AutoFS Release Notes

Installation Information

This section includes information on installing Enhanced AutoFS and verifying the Enhanced

AutoFS installation. In addition, it includes information required before the Enhanced

AutoFS installation.

System Requirements

You need to meet the following requirements before installing Enhanced AutoFS:

• Hardware requirement – HP 9000 system

• Software requirement – HP-UX 11i version 1

• Free disk space – 25 MB

Installing Enhanced AutoFS

To install Enhanced AutoFS on your system, perform the following steps:

1. Download the software depot to a directory, for example, /tmp/EnhancedAuto.depot.

2. Use swinstall to install Enhanced AutoFS; run the following command:

swinstall -x autoreboot=true -s /tmp/EnhancedAuto.depot

The system reboots automatically if the swinstall execution completes without errors.

Verifying Enhanced AutoFS Installation

You can verify the Enhanced AutoFS installation as follows:

• To verify that Enhanced AutoFS is successfully installed, run the following command:

swlist -l bundle ENHAUTO

If Enhanced AutoFS is successfully installed, the following message appears:

ENHAUTO B.11.11.0402.1 Enhanced AutoFS, February 2004

• To verify that there were no errors during the Enhanced AutoFS installation, run the

following command:

swverify ENHAUTO