Enhanced AutoFS Administrator's Guide

Installing Enhanced AutoFS
Installation and Verification
Chapter 2 11
Installation and Verification
This section provides information on installing Enhanced AutoFS and
verifying the Enhanced AutoFS installation.
Installing Enhanced AutoFS
To install Enhanced AutoFS on your system, perform the following steps:
1. Download the software depot to a directory, for example,
/tmp/EnhancedAuto.depot.
2. Use swinstall to install Enhanced AutoFS; run the following
command:
swinstall -x autoreboot=true -s /tmp/EnhancedAuto.depot
The system reboots automatically if the swinstall execution completes
without errors.
Verifying Enhanced AutoFS Installation
You can verify the Enhanced AutoFS installation as follows:
• To verify that Enhanced AutoFS is successfully installed, run the
following command:
swlist -l bundle ENHAUTO
If Enhanced AutoFS is successfully installed, the following message
appears:
ENHAUTO B.11.11.0402.1 Enhanced AutoFS, February 2004
• To verify that there were no errors during the Enhanced AutoFS
installation, run the following command:
swverify ENHAUTO
If Enhanced AutoFS is successfully installed, the following message
appears:
Verification succeeded